Kuidas autoakustilised materjalid parandavad salongi mugavust | NVH juhend

How Automotive Acoustic Materials Improve Cabin Comfort

For automotive OEM and Tier 1 engineers, cabin comfort is not simply about reducing a few decibels.

Effective automotive acoustic engineering starts with three fundamental questions:

• Kust müra tuleb?
• How does it travel into the cabin?
• Which material or structural solution is best suited to control it?

In automotive NVH engineering, noise generally reaches the passenger compartment through two primary paths:

• Õhus leviv müra
• Structure-borne noise

Understanding the difference between these two transmission paths is essential when selecting automotive acoustic absorbers, insulation materials, damping layers, decouplers, and multilayer acoustic systems.

Kiire vastus

Automotive acoustic materials improve cabin comfort by controlling sound and vibration through several different mechanisms.

Porous fiber materials are mainly used to absorb airborne sound.

Damping materials help reduce panel vibration.

Barrier layers reduce sound transmission.

Decoupling materials help limit vibration transfer between structures.

In real vehicle applications, these functions are often combined into an integrated acoustic package rather than relying on a single material to solve every NVH problem.

1. What Is Automotive NVH?

NVH stands for:

• müra
• vibratsioon
• Karmus

Together, these factors strongly influence how drivers and passengers perceive vehicle comfort and quality.

müra

Noise refers to the sound heard by vehicle occupants.

Typical automotive noise sources include:

• Tire and road noise
• Tuule müra
• Mootori müra
• Electric motor noise
• Gear whine
• HVAC noise
• Cooling system noise
• Body-panel radiation

Different frequency ranges create very different subjective impressions.

Low-frequency noise may be perceived as:

• kõmisev
• ragisema
• droning

Higher-frequency noise may be perceived as:

• vingumine
• susisev
• sharp tonal noise
• electric motor high-frequency noise

This is why overall sound pressure level alone cannot fully describe cabin acoustic quality.

vibratsioon

Vibration originates from mechanical excitation.

Tüüpilised allikad on järgmised:

• Tire-road interaction
• Suspension movement
• Powertrain excitation
• Elektrimootorid
• Käigukastisüsteemid
• Struktuurne resonants

These vibrations can travel through:

• Vedrustuse komponendid
• Alamkaadrid
• Šassii
• Kerepaneelid
• Seat rails
• Roolisüsteemid

Some vibrations are directly perceived by occupants.

Others excite body panels, which then radiate sound into the cabin.

Karmus

Harshness refers more to the subjective perception of vehicle vibration and sound quality than to a single physical parameter.

Näited:

• Strong impact when driving over road irregularities
• Excessive low-frequency vibration
• Cabin booming at specific vehicle speeds
• Unpleasant structural resonance

The objective of good NVH engineering is therefore not to eliminate every sound.

It is to control undesirable acoustic and vibration energy.

2. How Does Noise Enter the Vehicle Cabin?

From a transmission-path perspective, automotive cabin noise can generally be divided into two major categories:

Airborne Noise

ja

Konstruktsioonist leviv müra

These two mechanisms require different control strategies.

3. What Is Airborne Noise?

Airborne noise is sound energy that primarily travels through the air before reaching the passenger compartment.

For example, tire-road interaction generates acoustic energy around the wheel area.

Part of that sound travels through air and can enter the vehicle through the floor, wheel arch, doors, or other body structures.

Similarly, HVAC blowers generate sound that travels directly through air ducts and the cabin.

Typical airborne noise sources include:

• Tuule müra
• Tire radiation noise
• HVAC noise
• Cooling fan noise
• Exterior traffic noise
• Some electric motor noise
• Some powertrain noise

Once airborne sound enters the cabin, it can also reflect repeatedly from interior surfaces.

If the vehicle interior has insufficient sound absorption, sound energy may continue reflecting from areas such as:

• Katuse
• Peapea
• Uksed
• armatuurlaud
• Põrand
• Kere

This increases the acoustic energy perceived by occupants.

That is why sound-absorbing materials are widely used throughout the vehicle interior.

4. How Do Fibrous Automotive Acoustic Materials Absorb Sound?

PP/PET fibrous acoustic materials are typical porous sound absorbers.

When a sound wave enters the fiber network, air particles move through a complex porous structure.

During this process, acoustic energy is reduced through mechanisms such as:

• Friction between air and fibers
• Viskoossed kaod
• Thermal exchange
• Energy dissipation caused by airflow through the porous network

A small portion of the acoustic energy is ultimately converted into heat.

As a result, less sound energy is reflected back into the cabin.

This is the basic principle behind fibrous automotive acoustic absorbers.

5. Why Is Thickness Alone Not Enough?

A common assumption is that thicker acoustic material always performs better.

In reality, automotive sound absorption depends on many parameters, including:

• LOHVI PAKSUS
• Aluskaal
• Tihedus
• Kiu läbimõõt
• Fiber structure
• Poorsus
• Õhuvoolu takistus
• Tihendusaste
• Paigaldustingimused
• Target frequency range

One of the most important parameters is airflow resistance.

If a material is too open, sound can pass through easily, but interaction between the moving air and the fiber network may be insufficient.

If a material is too dense, too much sound may be reflected at the surface instead of entering the porous structure.

High-performance acoustic materials therefore require an appropriate balance between:

Porosity, fiber structure, and airflow resistance.

6. What Is Structure-Borne Noise?

Structure-borne noise begins as mechanical vibration transmitted through the vehicle structure.

Tüüpiline näide on:

Road excitation

↓

Rehvide vibratsioon

↓

Vedrustus

↓

Alamraam

↓

Vehicle body

↓

Body-panel vibration

↓

Sound radiation into the cabin

The final sound may still be heard through the air, but the original transmission path was structural.

This is the key difference between structure-borne and airborne noise.

7. Why Can Acoustic Fiber Not Solve All Structure-Borne Noise?

This is one of the most important distinctions in automotive acoustic engineering.

Porous acoustic fiber is mainly designed to absorb airborne sound energy.

If the main problem is strong vibration of a door panel, floor panel, wheelhouse, or another structural component, adding more acoustic fiber alone will not eliminate the root cause.

Structure-borne noise typically requires a combination of several control methods.

Summutavad materjalid

Damping layers are used to reduce vibration amplitude in metal or composite panels.

Tüüpilised rakendusvaldkonnad hõlmavad järgmist:

• Door outer panels
• Põrandapaneelid
• Wheelhouse areas
• Pagasiruumi paneelid
• Body sheet metal

Decoupling Materials

Decoupling layers help reduce mechanical coupling between structures.

They are also important in multilayer acoustic systems where a compliant layer is required between a barrier and the vehicle body.

Tõkkematerjalid

Barrier layers are used to reduce sound transmission.

They typically rely on higher surface mass or multilayer construction to improve transmission loss.

Imavad materjalid

Absorbing layers reduce airborne sound energy once that energy reaches the cabin or acoustic package.

In practical vehicle design, these functions are often combined as:

Damping + Decoupling + Barrier + Absorption

8. Airborne and Structure-Borne Noise Are Often Coupled

In real vehicle NVH problems, airborne and structure-borne mechanisms are not completely independent.

Näiteks:

Road excitation first generates mechanical vibration.

That vibration travels through the suspension and body structure.

The body panel is then excited.

The vibrating panel radiates sound into the cabin air.

The full path may therefore be:

Road Excitation

↓

Structure-Borne Vibration

↓

Body-Panel Vibration

↓

Airborne Sound Radiation

↓

Passenger Perception

For this reason, OEM NVH engineers do not simply ask whether a problem is airborne or structure-borne.

They need to understand:

• Which source is dominant?
• Which transfer path contributes most?
• Which frequency range requires improvement?

9. Different Frequency Ranges Require Different NVH Strategies

No single material can effectively solve every noise problem across the entire frequency spectrum.

Different frequency ranges typically require different engineering strategies.

Madal sagedus

Low-frequency problems are often related to:

• Body modes
• Konstruktsiooniline vibratsioon
• Paneeli resonants
• Suspension excitation
• Powertrain excitation

Severe low-frequency issues usually cannot be solved by lightweight porous absorbers alone.

Typical solutions may include:

• Struktuuriline optimeerimine
• Summutamine
• Vibratsiooni isolatsioon
• Mount optimization
• Body stiffness optimization

Mid Frequency

Mid-frequency noise often requires a combination of:

• Summutamine
• Lahtisidumine
• Barjääri jõudlus
• Heli neeldumine

Mid-to-High Frequency

Fibrous porous absorbers are particularly useful in the mid-to-high-frequency range.

Their acoustic performance can be tuned by adjusting:

• LOHVI PAKSUS
• Aluskaal
• Fiber structure
• Õhuvoolu takistus

This is why automotive acoustic materials should not be evaluated by a single absorption value.

The full absorption curve across the relevant frequency range is far more meaningful.

10. Why Do Electric Vehicles Change Acoustic Material Requirements?

Electric vehicles do not make NVH engineering easier.

They change the noise spectrum.

In internal-combustion vehicles, engine noise creates a relatively strong background sound that can mask other noise sources.

In electric vehicles, this masking effect is reduced.

As a result, previously less noticeable sounds can become more prominent, including:

• Rehvimüra
• Teemüra
• Tuule müra
• Elektrimootor vingub
• Käigukasti müra
• Inverter tonal noise
• HVAC noise
• Cooling-system noise

EV acoustic design therefore places greater emphasis on:

• Lairiba heli neeldumine
• Mid-to-high-frequency noise control
• Kergekaaluline
• Materjalide integreerimine
• Local acoustic optimization

11. Why Are Lightweight Acoustic Materials Becoming More Important?

Adding more NVH material can improve acoustic performance.

However, additional material also increases vehicle mass.

This can directly affect:

• Sõiduki kaal
• Energiakulu
• EV driving range
• Tootmiskulu
• Monteerimise keerukus

For this reason, the goal is not simply to add more material.

The objective is to achieve the required acoustic performance with lower weight and less installation space.

This is one of the main advantages of fibrous automotive acoustic materials.

Kohandades:

• Kiudkoostis
• Aluskaal
• LOHVI PAKSUS
• Tihedus
• Kihi struktuur

the material can be optimized for different locations and vehicle platforms.

12. Where Are Automotive Acoustic Materials Used?

Different vehicle zones have different acoustic requirements.

Roof and Headliner

Typical concerns include:

• Tuule müra
• Cabin reverberation
• Rain impact noise
• Lairiba heli neeldumine

Low weight is particularly important in this area.

Uksed

Door systems may be affected by:

• Exterior airborne noise
• Door-panel vibration
• Cavity resonance
• Speaker interaction

For this reason, door acoustic systems often require both absorption and structural vibration control.

Firewall and Dashboard Area

This is one of the most important NVH control zones.

Typical noise sources include:

• Powertrain noise
• Teemüra
• HVAC noise
• Structural radiation

Multilayer acoustic systems are commonly used here rather than a single absorber.

Põrand

Typical concerns include:

• Tire-road excitation
• Suspension noise
• Underbody noise
• Konstruktsiooniline vibratsioon

Common floor acoustic systems may include:

Absorber + Decoupler + Barrier

with localized damping where necessary.

Wheel Arch

The wheel area is one of the most important noise sources in the vehicle.

Acoustic materials used here may need to address:

• Rehvimüra
• Road excitation
• Stone impact
• Kokkupuude veega
• Saastumine

Therefore, material selection must also consider:

• Niiskuskindlus
• KLASS
• Saastumisekindlus

Kere

Rear-wheel and rear-body excitation can introduce significant acoustic energy into the trunk cavity.

Absorptive materials can reduce cavity reflection and help limit further sound propagation toward the passenger compartment.

Pillars and Body Cavities

Vehicle cavities can act as acoustic transmission paths.

Proper use of:

• Acoustic absorbers
• Cavity fillers
• Tihendussüsteemid

can reduce sound transmission through these areas.

13. Which Material Parameters Should OEM Engineers Evaluate?

Automotive acoustic materials should not be evaluated only by whether they are “good at absorbing sound.”

A more complete evaluation should include the following parameters.

Akustiline esitus

• Heli neeldumistegur
• Frequency-dependent absorption curve
• Õhuvoolu takistus
• Õhuvoolu takistus

Füüsikalised omadused

• LOHVI PAKSUS
• Aluskaal
• Tihedus
• Kompressiooni taastumine
• Mõõtmete stabiilsus

Keskkonnategevus

• Kuumakindlus
• Niiskuskindlus
• Vananemise vastupanu

Automotive Requirements

• Süttivus
• VOC performance
• lõhn
• Udumine
• Materjalide ühilduvus

Töötlemise jõudlus

• Stantsimisvõimalused
• Termoformimine
• Lamineerimine
• Isekleepuv alus
• Aluminum foil lamination
• Complex-shape conversion

Jätkusuutlikkus

• Kergekaaluline
• Taaskasutatavus
• Material simplification
• Taaskasutatud sisu

14. Why Is Installation Condition as Important as Material Data?

The same acoustic material can perform very differently under different installation conditions.

Oluliste tegurite hulka kuuluvad:

• Õhuvahe
• Kokkusurumine
• Backing surface
• Paigaldusala
• geomeetria
• Edge leakage
• Adjacent materials
• Mitmekihiline konstruktsioon

For example, a material with a free-state thickness of 20 mm may behave very differently if compressed to 8 mm after installation.

Compression can change:

• Poorsus
• Õhuvoolu takistus
• Effective thickness
• Akustiline esitus

This is why automotive acoustic materials should not be evaluated only from laboratory datasheets.

Final installed condition must also be considered.

15. Transulate™ Automotive Acoustic Materials

Tõlkida™ is a PP/PET bicomponent fiber material series developed by SINOYQX for automotive acoustic and thermal-management applications.

The material is designed for applications including:

• Automotive sound absorption
• Soojusisolatsioon
• Lightweight acoustic packages

Tüüpilised rakendusvaldkonnad hõlmavad järgmist:

• Katuse
• Peapea
• Uks
• armatuurlaud
• tulemüüri
• Põrand
• Kere
• sammas
• Siseviimistlus

Depending on the project, key material parameters can be customized, including:

• Aluskaal
• LOHVI PAKSUS
• Tihedus
• Fiber structure
• Lamination structure

16. How to Select the Transulate™ Series

Tõlkida™ LT Series

Typical basis weight:

100-200 gsm

Tüüpiline paksus:

10–20 mm

Suitable for lightweight applications such as:

• Katuse
• Peapea
• Uks
• sammas
• Siseviimistlus

The key focus is low weight.

Tõlkida™ AP Series

Typical basis weight:

300-500 gsm

Tüüpiline paksus:

20–30 mm

Sobilik tootele:

• tulemüüri
• Uks
• Põrand
• Kere
• General acoustic packages

Transulate™ HP Series

Typical basis weight:

600-900 gsm

Tüüpiline paksus:

30–50 mm

Suitable for applications requiring higher sound absorption and where more installation space is available.

17. What Additional Processing Options Are Available?

Depending on OEM and Tier 1 project requirements, Transulate™ can be supplied or converted as:

• Rullid
• Lehed
• Stantsitud osad
• Self-adhesive parts
• Aluminum-foil laminated products
• Nonwoven-faced products
• Multilayer composites
• Kohandatud paksus
• Customized basis weight

The final acoustic structure should be selected according to:

Target Frequency + Installation Location + Available Space + Weight Target

18. Automotive Acoustic Engineering Is Moving from Material Selection to System Design

The future of automotive NVH development is not simply about identifying which absorber has the highest sound absorption coefficient.

Olulisemad küsimused on järgmised:

• Which noise source is dominant?
• Which transfer path is most important?
• Which frequency range needs improvement?
• Which material is best suited to the location?
• How can the target performance be achieved with less weight?

A more effective development process is:

Identify the Noise Source

↓

Analyze the Transfer Path

↓

Define the Target Frequency

↓

Select the Control Strategy

↓

Sobitage materjal

↓

Validate at Component Level

↓

Validate at Vehicle Level

This is how material performance can be converted into real cabin comfort.

Järeldus

Vehicle cabin comfort is not controlled by a single material.

Airborne noise is mainly managed through:

Sound absorption and sound insulation.

Structure-borne noise generally requires:

Damping, vibration isolation, decoupling, and structural optimization.

Fibrous automotive acoustic materials play an important role in reducing airborne sound energy, limiting cabin reflections, and improving mid-to-high-frequency acoustic performance.

This becomes even more important in electric vehicles, where reduced engine masking makes tire noise, wind noise, and electric-drive tonal noise more noticeable.

At the same time, vehicle manufacturers continue to reduce weight.

For this reason, the next generation of automotive acoustic systems is not about adding more material.

See on umbes:

Using the right material, in the right location, for the right frequency range.

Transulate™ automotive acoustic materials can be customized according to OEM and Tier 1 requirements, including application location, target frequency, thickness, basis weight, lamination structure, and annual demand.

Korduma kippuvad küsimused

What is the difference between airborne noise and structure-borne noise in a vehicle?

Airborne noise travels primarily through air, such as wind noise, HVAC noise, and some tire noise.

Structure-borne noise begins as mechanical vibration transmitted through the suspension, body, or other structural components before being radiated as sound.

Can automotive acoustic fiber directly reduce structure-borne noise?

Mitte täielikult.

Porous fibrous materials primarily absorb airborne sound.

If the main problem is structural panel vibration, additional damping, isolation, decoupling, or structural optimization is usually required.

What are the most important parameters for automotive sound absorbers?

Important parameters include thickness, basis weight, fiber structure, airflow resistance, absorption performance across frequency, compression condition, installation gap, and target frequency range.

Why are lightweight acoustic materials important for electric vehicles?

Electric vehicles have less engine masking noise, so tire noise, wind noise, electric motor noise, and other high-frequency sounds become more noticeable.

At the same time, lower vehicle mass helps improve energy efficiency and driving range.

Where can Transulate™ automotive acoustic materials be used?

Typical applications include roof, headliner, doors, firewall, dashboard, floor, trunk, pillars, and interior trim.

The final material specification should be selected according to installation space, target frequency, basis weight, and thickness requirements.